Maker project

Z80-512K

BOM001267 · 1

What the project is · as the catalogue files it; the circuit functions below are BOM rule hits

The catalogue does not say what this project is for.

Circuit functions included · BOM rule hits · not reviewed

FPGA / CPLD
- U4 ATF1504AS · by part number
Flash (SPI / QSPI / parallel)
- U2 SST39SF040 · by part number
SRAM / PSRAM
- U3 AS6C4008 · by part number
Small programmable logic (GAL / GreenPAK)
- U4 ATF1504AS · by part number
Retro computing / bus peripherals (Z80 / 6502 / UART chips)
- U1 Z84C00 · by part number
Rotary encoder / potentiometer / joystick
- RV1 2k · by footprint

Helper circuits

Debug / programming header
- J2 JTAG · by part number
Crystal / oscillator
- X1 7.3728MHz · by part number

PCB · seen from the top

Full size

Schematic

Full size

Online view

Loading the project view…

20 rows · 29 parts0 of 20 rows placedHover or click a row to mark its parts in the view; click a part in the view to find its row.

Looks up part numbers and makers at ezPLM, DigiKey and Mouser. What it finds are suggestions: check one before you use it.

Designators	Value	Part	Qty
C1	10uFCap_Cer_508	10uF	1
R7	1kR_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical	1k	1
RN1	4.7kConn_SIL9	4.7k	1
U4	ATF1504ASIC_PLCC44_TH	ATF1504AS	1
RV1	2kPotentiometer_Bourns_3266W_Vertical	2k	1
LOGO1	Logo_Open_Hardware_SmallOSHW-Logo_5.7x6mm_SilkScreen	Logo_Open_Hardware_Small	1
U5	ADM693ASocket_DIP16_300	ADM693A	1
U3	AS6C4008Socket_DIP32_600	AS6C4008	1
J2	JTAGConn_Pin_Header_5x2_2.54mm	JTAG	1
X1	7.3728MHzOSC_Half_Can_DIP8	7.3728MHz	1
J3	RCBus-80Conn_Pin_Header_40x2_2.54mm_Right_Angle_RCBus80	RCBus-80	1
R6	29.4kR_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical	29.4k	1
U1	Z84C00Socket_DIP40_600	Z84C00	1
H1	3.2mmMountingHole_3.2mm_M3_DIN965	3.2mm	1
R1, R2, R3, R4, R5	10kR_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical	10k	5
J1	VBATPinHeader_1x02_P2.54mm_Horizontal	VBAT	1
U2	SST39SF040Socket_DIP32_600	SST39SF040	1
RN2	4.7kConn_SIL6	4.7k	1
C2, C3, C4, C5, C6, C7	100nFCap_Cer_508	100nF	6
D1	CPULED_3mm	CPU	1

What you can do

Function

AI assistant

Written by a model from the evidence it cites · not reviewed

Answers use only what was read of this design: its BOM lines, the function hits, the parsed nets around your selection and the part's catalogue record. Every statement links to its evidence.

The AI assistant is not available here: no model is set up for it. The design, its BOM and the viewer work as usual.

Context: the whole design

PartSign in to ask the assistant

Source

Project: Z80-512K
BOM number: BOM001267
Version: 1
EDA tool: kicad
Parse status: succeeded
Licence: Not identified: the catalogue states no licence and this project's files have not been checked for one yet. Do not assume any right to reuse it.