Skip to content

Maker project

rfidetector

BOM012185 · RFIDetector-rev0.12

What the project is · as the catalogue files it; the circuit functions below are BOM rule hits

Filed under “模拟信号处理链路” in the ezPLM catalogue.

Circuit functions included · BOM rule hits · not reviewed

No BOM line matched a category's rules. That does not mean there is no circuit: the BOM may hold no part the rules know.

    The board in rfidetector seen from the top (bottom copper dimmed), drawn from its parsed design files
    PCB · seen from the top
    Full size
    The schematic sheet of rfidetector placing the most parts, drawn from its parsed design files
    Schematic
    Full size

    Online view

    Loading the project view…

    8 rows · 34 parts0 of 8 rows placedHover or click a row to mark its parts in the view; click a part in the view to find its row.

    Looks up part numbers and makers at ezPLM, DigiKey and Mouser. What it finds are suggestions: check one before you use it.

    DesignatorsValuePartQtyPlaced
    C1, C2, C3, C447uC_0603_1608Metric_Pad1.08x0.95mm_HandSolder
    No part number
    		4
    C54.7nC_0603_1608Metric_Pad1.08x0.95mm_HandSolder
    No part number
    		1
    C6, C7, C12, C13, C140C_0603_1608Metric_Pad1.08x0.95mm_HandSolder
    No part number
    		5
    C8, C9, C10, C1110uC_0603_1608Metric_Pad1.08x0.95mm_HandSolder
    No part number
    		4
    D1, D6LEDLED_0603_1608Metric_Pad1.05x0.95mm_HandSolder
    No part number
    		2
    D2, D3, D4, D5, D7, D8, D9, D101N5819WSD_SOD-323_HandSoldering
    No part number
    		8
    JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8SolderJumper_2_OpenSolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm
    No part number
    		8
    JP9, JP11SolderJumper_3_OpenSolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm
    No part number
    		2
    Sign in to add parts to my components