Maker project
ch32v003_breakout_boards
BOM011932 · CH32V003-TSSOP
What the project is · as the catalogue files it; the circuit functions below are BOM rule hits
Filed under “嵌入式系统” in the ezPLM catalogue.
Circuit functions included · BOM rule hits · not reviewed
- Low-dropout regulator (LDO)
- U1 AP2112K-3.3 · by part number
- RISC-V MCU
- U2 CH32V003FxPx · by part number
Helper circuits
- USB connector (Type-C / Micro / A)
- J1 USB_C · by part number
Online view
Loading the project view…
14 rows · 16 parts0 of 14 rows placedHover or click a row to mark its parts in the view; click a part in the view to find its row.
Looks up part numbers and makers at ezPLM, DigiKey and Mouser. What it finds are suggestions: check one before you use it.
| Designators | Value | Part | Qty | Placed | |
|---|---|---|---|---|---|
| C1, C3 | 100nFC_0805_2012Metric | No part number | 2 | ||
| C2 | 10uFC_0805_2012Metric | No part number | 1 | ||
| R1, R2 | 5K1R_0805_2012Metric | No part number | 2 | ||
| R3 | 1K5R_0805_2012Metric | No part number | 1 | ||
| U1 | AP2112K-3.3SOT-23-5 | No part number | 1 | ||
| U2 | CH32V003FxPxTSSOP-20_4.4x6.5mm_P0.65mm | No part number | 1 | ||
| SW1 | NRSTInterface labelSW_Push_SPST_NO_Alps_SKRK | No part number | 1 | ||
| JP1 | JMP_VIN_SELInterface labelSolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | No part number | 1 | ||
| JP2 | JMP_USB_DMInterface labelSolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | No part number | 1 | ||
| JP3 | JMP_USB_DPInterface labelSolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | No part number | 1 | ||
| J1 | USB_CUSB_C_Receptacle_G-Switch_GT-USB-7010ASV | No part number | 1 | ||
| J2 | HEADER_LEFTInterface labelPinSocket_1x11_P2.54mm_No_Silk | No part number | 1 | ||
| J3 | HEADER_RIGHTInterface labelPinSocket_1x11_P2.54mm_No_Silk | No part number | 1 | ||
| J4 | PROG_HEADERInterface labelPinSocket_1x03_P2.54mm_No_Silk | No part number | 1 |