Maker project
Makerville Knit
BOM002451 · v1.0
What the project is · as the catalogue files it; the circuit functions below are BOM rule hits
The catalogue does not say what this project is for.
Circuit functions included · BOM rule hits · not reviewed
- Low-dropout regulator (LDO)
- U1 AP1117D33 · by part number
- Flash (SPI / QSPI / parallel)
- U3 W25Q64 · by part number
- USB to serial
- U4 CP2102 · by part number
Helper circuits
- USB connector (Type-C / Micro / A)
- P4 USB_OTG · by footprint
Online view
Loading the project view…
19 rows · 31 parts0 of 19 rows placedHover or click a row to mark its parts in the view; click a part in the view to find its row.
Looks up part numbers and makers at ezPLM, DigiKey and Mouser. What it finds are suggestions: check one before you use it.
| Designators | Value | Part | Qty | Placed | |
|---|---|---|---|---|---|
| U1 | AP1117D33 | No part number | 1 | ||
| U3 | W25Q64 | No part number | 1 | ||
| U4 | CP2102 | No part number | 1 | ||
| U2 | AWCU300CU300B | 1 | |||
| C2 | 22uF 10VTantalC_SizeA_EIA-3216_HandSoldering | 22uF 10V | 1 | ||
| P4 | USB_OTGUSB_Micro-B | USB_OTG | 1 | ||
| SW2 | BootSW_SPST_EVQPE1 | Boot | 1 | ||
| C1 | 10uF 10VTantalC_SizeA_EIA-3216_HandSoldering | 10uF 10V | 1 | ||
| R16 | 1.8kC_0603_1608Metric_Pad1.08x0.95mm_HandSolder | 1.8k | 1 | ||
| SW1 | RESETnSW_SPST_EVQPE1 | RESETn | 1 | ||
| D2 | LED_REDLED_0805_2012Metric | LED_RED | 1 | ||
| G*** | LOGOknit | LOGO | 1 | ||
| C3, C4, C5, C6, C7, C8, C9 | 0.1uFC_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 0.1uF | 7 | ||
| R2, R3, R5 | 10kC_0603_1608Metric_Pad1.08x0.95mm_HandSolder | 10k | 3 | ||
| R1, R4 | 1kC_0603_1608Metric_Pad1.08x0.95mm_HandSolder | 1k | 2 | ||
| R17, R19, R20 | 51kC_0603_1608Metric_Pad1.08x0.95mm_HandSolder | 51k | 3 | ||
| P3 | CONN_01X04Socket_Strip_Straight_1x04 | 1 | |||
| P1, P2 | CONN_01X16Socket_Strip_Straight_1x16 | 2 | |||
| D1 | LED_GREENLED_0805_2012Metric | LED_GREEN | 1 |