Manufacturer reference design

TIDA-01329

BOM002403 · 1.1

What the project is · as the catalogue files it; the circuit functions below are BOM rule hits

Filed under “电机驱动” in the ezPLM catalogue.

Circuit functions included · BOM rule hits · not reviewed

Shift register / latch / flip-flop
- U1 SN74HC595DR · by part number
Relay / load driver (ULN2003 / MOSFET driver)
- U2 ULN2003ADR · by part number

PCB · seen from the top

Full size

Schematic

Full size

Online view

Loading the project view…

27 rows · 51 parts0 of 27 rows placedHover or click a row to mark its parts in the view; click a part in the view to find its row.

Looks up part numbers and makers at ezPLM, DigiKey and Mouser. What it finds are suggestions: check one before you use it.

Designators	Value	Part	Qty
U2	ULN2003ADRD0016A_N	ULN2003ADR	1
S1, S2	CAS-D20TASW_CAS-D20TA	CAS-D20TA	2
R15	ERJ-8GEY0R00V1206	ERJ-8GEY0R00V	1
FID1, FID2, FID3	FiducialFiducial10-20	Fiducial	3
D1, D2, D3, D4	LG L29K-G2J1-24-ZLG L29K_GREEN	LG L29K-G2J1-24-Z	4
TP1, TP2, TP3, TP4	5015Testpoint_Keystone_Miniature	5015	4
U1	SN74HC595DRD0016A_N	SN74HC595DR	1
C1	GRM21BR71H105KA12L0805_HV	GRM21BR71H105KA12L	1
J2/J4	SSQ-110-03-T-DBoosterPack_40pin_J2J4	SSQ-110-03-T-D	1
ZZ3	These assemblies must comply with workmanship standards IPC-A-610 Class 2, unless otherwise specified.AssemblyNote	These assemblies must comply with workmanship standards IPC-A-610 Class 2, unless otherwise specified.	1
R2, R6, R8, R9, R10, R11, R12, R13	CRCW0402560RJNED0402	CRCW0402560RJNED	8
Q1	CSD17571Q2TRANS_NexFET_Q2	CSD17571Q2	1
J9	PEC02SAANCONN_PEC02SAAN	PEC02SAAN	1
D5	DFLZ12-7powerDI123	DFLZ12-7	1
ZZ2	These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.AssemblyNote	These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.	1
J1/J3	SSQ-110-03-T-DBoosterPack_40pin_J1J3	SSQ-110-03-T-D	1
J7, J8	PPPC061LGBN-RCSullins_xPxC061LGBN	PPPC061LGBN-RC	2
Logo3	FCC disclaimerFCC_disclaimer	FCC disclaimer	1
R1, R3, R4, R7	CRCW04021K00JNED0402	CRCW04021K00JNED	4
J5	SSQ-110-03-F-SSamtec_SSQ-110-03-x-S	SSQ-110-03-F-S	1
J6	TSW-105-07-G-STSW-105-07-G-S	TSW-105-07-G-S	1
D6, D7, D8	DB2W40200LSOD-123F	DB2W40200L	3
Logo2	Pb-Free SymbolPb-Free_Overlay_Small	Pb-Free Symbol	1
ZZ1	These assemblies are ESD sensitive, ESD precautions shall be observed.AssemblyNote	These assemblies are ESD sensitive, ESD precautions shall be observed.	1
R5, R14	ERJ-3GEY0R00V0603	ERJ-3GEY0R00V	2
C2, C3	GRM188R71H104KA93D0603	GRM188R71H104KA93D	2
J0	TSW-108-07-G-STSW-108-07-G-S	TSW-108-07-G-S	1

What you can do

Function

AI assistant

Written by a model from the evidence it cites · not reviewed

Answers use only what was read of this design: its BOM lines, the function hits, the parsed nets around your selection and the part's catalogue record. Every statement links to its evidence.

The AI assistant is not available here: no model is set up for it. The design, its BOM and the viewer work as usual.

Context: the whole design

PartSign in to ask the assistant

Source

Project: TIDA-01329
Project category: 电机驱动
BOM number: BOM002403
Version: 1.1
EDA tool: kicad
Parse status: succeeded
Licence: Not identified: the catalogue states no licence and this project's files have not been checked for one yet. Do not assume any right to reuse it.