Manufacturer reference design

TIDA-020023

BOM001722 · v1.0

What the project is · as the catalogue files it; the circuit functions below are BOM rule hits

Filed under “TI” in the ezPLM catalogue.

Circuit functions included · BOM rule hits · not reviewed

Low-dropout regulator (LDO)
- U1 TPS70950QDBVRQ1 · by part number
Comparator
- U3 TLV1805QDBVRQ1 · by part number
ESD / TVS protection
- D5 SMBJ5366B-TP · by part number

PCB · seen from the top

Full size

Schematic

Full size

Online view

Loading the project view…

26 rows · 38 parts0 of 26 rows placedHover or click a row to mark its parts in the view; click a part in the view to find its row.

Looks up part numbers and makers at ezPLM, DigiKey and Mouser. What it finds are suggestions: check one before you use it.

Designators	Value	Part	Qty
D5	SMBJ5366B-TPSMB	SMBJ5366B-TP	1
Logo3	FCC disclaimerFCC_disclaimer	FCC disclaimer	1
D3, D4	B120-13-FSMA	B120-13-F	2
C3	GRM188Z71C225KE430603S	GRM188Z71C225KE43	1
Logo4	ESD SusceptibleESD_Overlay_Medium	ESD Susceptible	1
R5	CRCW060310K0JNEA0603S	CRCW060310K0JNEA	1
ZZ1	This Assembly Note is for PCB labels onlyAssemblyNoteLabel	This Assembly Note is for PCB labels only	1
TP1, TP2, TP3, TP4, TP5	5001Keystone5001	5001	5
ZZ2	These assemblies are ESD sensitive, ESD precautions shall be observed.AssemblyNote	These assemblies are ESD sensitive, ESD precautions shall be observed.	1
J3	PEC02SAANCONN_PEC02SAAN	PEC02SAAN	1
Q1	SQ4850EYSOIC-8	SQ4850EY	1
C2, C5	GRM188R72A104KA35J0603S	GRM188R72A104KA35J	2
ZZ4	These assemblies must comply with workmanship standards IPC-A-610 Class 2, unless otherwise specified.AssemblyNote	These assemblies must comply with workmanship standards IPC-A-610 Class 2, unless otherwise specified.	1
C1, C7, C8	0603YC104JAT2A0603S	0603YC104JAT2A	3
Logo2	Pb-Free SymbolPb-Free_Overlay_Small	Pb-Free Symbol	1
R2, R4	CRCW04020000Z0EDHP0402	CRCW04020000Z0EDHP	2
D2	SM4T23CAYSMA_Bi	SM4T23CAY	1
U1	TPS70950QDBVRQ1DBV0005A_N	TPS70950QDBVRQ1	1
R3, R6	CRCW0603130RFKEA0603	CRCW0603130RFKEA	2
C4, C6, C9	CGA3E1X7R1V105K080AC0603S	CGA3E1X7R1V105K080AC	3
U2	INA253A1IPWRPW0020A_N	INA253A1IPWR	1
ZZ3	These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.AssemblyNote	These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.	1
D1	CDBU00340SOD-523F	CDBU00340	1
Logo1	WEEE logoWEEE_Minimum	WEEE logo	1
R1	FC0603E50R0BTBST10603S	FC0603E50R0BTBST1	1
U3	TLV1805QDBVRQ1DBV0006A_N	TLV1805QDBVRQ1	1

What you can do

Function

AI assistant

Written by a model from the evidence it cites · not reviewed

Answers use only what was read of this design: its BOM lines, the function hits, the parsed nets around your selection and the part's catalogue record. Every statement links to its evidence.

The AI assistant is not available here: no model is set up for it. The design, its BOM and the viewer work as usual.

Context: the whole design

PartSign in to ask the assistant

Source

Project: TIDA-020023
Project category: TI
BOM number: BOM001722
Version: v1.0
EDA tool: kicad
Parse status: succeeded
Licence: Not identified: the catalogue states no licence and this project's files have not been checked for one yet. Do not assume any right to reuse it.