Maker project
FullMega
BOM001526 · v1.0
What the project is · as the catalogue files it; the circuit functions below are BOM rule hits
Filed under “嵌入式系统” in the ezPLM catalogue.
Circuit functions included · BOM rule hits · not reviewed
- Low-dropout regulator (LDO)
- U3 AP1117-50 · by part number
- U4 AP1117-33 · by part number
- 8-bit MCU (AVR / PIC / 8051 / STM8)
- U2 ATMEGA2560-16AU · by part number
- USB to serial
- U1 CP2104 · by part number
- P15 CP2102 · by part number
Helper circuits
- Power input connector
- J3 DC_JACK · by footprint
- Crystal / oscillator
- Y1 Resonator 16MHz · by part number
- X2 16MHz · by part number
- X3 16MHz · by part number
- X1 32.768kHz (optional) · by part number
- Y2 Crystal_GND23 16MHz · by part number
- USB connector (Type-C / Micro / A)
- J4 USB_B_Micro · by part number
- J2 USB_B_Micro · by part number
- J1 USB_B · by part number
- Fuse / resettable fuse
- F1 0.5A · by footprint
Online view
Loading the project view…
47 rows · 76 parts0 of 47 rows placedHover or click a row to mark its parts in the view; click a part in the view to find its row.
Looks up part numbers and makers at ezPLM, DigiKey and Mouser. What it finds are suggestions: check one before you use it.
| Designators | Value | Part | Qty | ||
|---|---|---|---|---|---|
| U1 | CP2104 | No part number | 1 | ||
| U2 | ATMEGA2560-16AU | No part number | 1 | ||
| U3 | AP1117-50 | No part number | 1 | ||
| U4 | AP1117-33 | No part number | 1 | ||
| R9 | 1MR_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 1M | 1 | ||
| R3, R4, R5, R6, R10, R11 | 1kR_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 1k | 6 | ||
| P6 | PWMPin_Header_Straight_2x08 | PWM | 1 | ||
| P5 | PWMPin_Header_Straight_2x10 | PWM | 1 | ||
| P4 | AnalogPin_Header_Straight_2x08 | Analog | 1 | ||
| P8, P9, P10, P11, P12, P13 | CONN_01X01Arduino_1pin | 6 | |||
| TH1, TH2 | CG0603MLC-05ER_0603_HandSoldering | 2 | |||
| P1 | DigitalSocket_Strip_Arduino_2x18 | Digital | 1 | ||
| Y1 | Resonator 16MHzMURATA_CSTCE_V53 | 1 | |||
| D2 | GREDLED-1206 | GRED | 1 | ||
| C12, C13 | 22C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 22 | 2 | ||
| P7 | CommunicationPin_Header_Straight_2x08 | Communication | 1 | ||
| P17 | CONN_1x1Pin_Header_Straight_1x01 | 1 | |||
| P16 | CONN_6Pin_Header_Straight_2x03 | 1 | |||
| P2 | PowerPin_Header_Straight_2x08 | Power | 1 | ||
| X2 | 16MHzCrystal_HC49-U_Vertical | 1 | |||
| F1 | 0.5AFuse_SMD1206_Wave | 0.5A | 1 | ||
| X3 | 16MHzQ_49U3HMS | 1 | |||
| C1, C2, C5, C6, C7, C8, C11, C14, C15, C16, C17 | 0.1mC_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 0.1m | 11 | ||
| X1 | 32.768kHz (optional)Crystal_Round_Horizontal_3mm_BigPad | 1 | |||
| J3 | DC_JACKJACK_ALIM | DC_JACK | 1 | ||
| R7 | 10kR_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 10k | 1 | ||
| P21 | DigitalPin_Header_Straight_1x18 | Digital | 1 | ||
| J4 | USB_B_MicroAB2_USB_MICRO_SMD | USB_B_Micro | 1 | ||
| D1, D6, D7 | MBR120SOD-123 | 3 | |||
| C3 | 1uTantalC_SizeA_EIA-3216_Wave | 1u | 1 | ||
| C9, C10 | 10u/35VTantalC_SizeD_EIA-7343_Wave | 10u/35V | 2 | ||
| SW1, SW2 | SW_PUSH3x6x2.5mm_tact_switch | SW_PUSH | 2 | ||
| J2 | USB_B_MicroUSB_Micro-B | USB_B_Micro | 1 | ||
| L2 | bead_30Choke_SMD_1206_Standard | 1 | |||
| P15 | CP2102Pin_Header_Straight_1x06 | 1 | |||
| J1 | USB_BUSB_B | USB_B | 1 | ||
| R8 | 100R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 100 | 1 | ||
| D4, D5 | YLEDLED-1206 | YLED | 2 | ||
| P14 | xx2Pin_Header_Straight_2x05 | xx2 | 1 | ||
| P22 | DigitalPin_Header_Straight_1x16 | Digital | 1 | ||
| Y2 | Crystal_GND23 16MHzCRYSTAL_3225 | 1 | |||
| P19 | DigitalPin_Header_Straight_2x16 | Digital | 1 | ||
| R1, R2 | 22R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 22 | 2 | ||
| P3, P20 | AnalogPin_Header_Straight_1x08 | Analog | 2 | ||
| C4 | 10uTantalC_SizeA_EIA-3216_Wave | 10u | 1 | ||
| L1 | 10uHChoke_SMD_1206_Standard | 10uH | 1 | ||
| D3 | RLEDLED-1206 | RLED | 1 |