Maker project

FujiNet for Coleco ADAM

BOM001219 · v1.0

What the project is · as the catalogue files it; the circuit functions below are BOM rule hits

Filed under “接口转换及调试器” in the ezPLM catalogue.

Circuit functions included · BOM rule hits · not reviewed

Wireless SoC / wireless module
- U1 ESP32-DevKitC-VE · by part number
Core board / dev board module
- U1 ESP32-DevKitC-VE · by part number
Wi-Fi
- U1 ESP32-DevKitC-VE · by part number
Bluetooth / Bluetooth Low Energy
- U1 ESP32-DevKitC-VE · by part number

Helper circuits

Buttons / switches
- SW1 ButtonA · by footprint
- SW3 Safe Reset · by footprint
- SW2 ButtonB · by footprint

PCB · seen from the top

Full size

Schematic

Full size

Online view

Loading the project view…

21 rows · 38 parts0 of 21 rows placedHover or click a row to mark its parts in the view; click a part in the view to find its row.

Looks up part numbers and makers at ezPLM, DigiKey and Mouser. What it finds are suggestions: check one before you use it.

Designators	Value	Part	Qty
R14, R16	4.7KR_0805_2012Metric_Pad1.20x1.40mm_HandSolder	4.7K	2
C2	100uF 10VCP_EIA-7343-20_Kemet-V_Pad2.25x2.55mm_HandSolder	100uF 10V	1
Q1	MMBT3904	No part number	1
Q2	MMBT3906	No part number	1
D4, D5	B140-E3	No part number	2
SW1	ButtonASW_Push_SPST_NO_Alps_SKRK	ButtonA	1
D2	BT_BLUELED_D3.0mm	BT_BLUE	1
D1	WIFI_WHITELED_D3.0mm	WIFI_WHITE	1
R10, R13	2KR_0805_2012Metric_Pad1.20x1.40mm_HandSolder	2K	2
SW3	Safe ResetSW_Push_SPST_NO_Alps_SKRK	Safe Reset	1
R1, R2, R3, R4, R5, R6, R11, R15, R19, R20, R21	10KR_0805_2012Metric_Pad1.20x1.40mm_HandSolder	10K	11
R12	1.2KR_0805_2012Metric_Pad1.20x1.40mm_HandSolder	1.2K	1
R18	33RR_0805_2012Metric_Pad1.20x1.40mm_HandSolder	33R	1
P1	ST-TF-003ASUNTECH_ST-TF-003A	ST-TF-003A	1
U1	ESP32-DevKitC-VEMODULE_ESP32-DEVKITC-32U	ESP32-DevKitC-VE	1
R7, R8, R9, R17	1KR_0805_2012Metric_Pad1.20x1.40mm_HandSolder	1K	4
H1, H2	MountingHoleMountingHole_2.7mm_M2.5	MountingHole	2
C1	47uF 10vCP_EIA-3528-15_AVX-H_Pad1.50x2.35mm_HandSolder	47uF 10v	1
D3	BUS_ORANGELED_D3.0mm	BUS_ORANGE	1
J1	RJ12RJ12_Amphenol_54601	RJ12	1
SW2	ButtonBSW_Push_SPST_NO_Alps_SKRK	ButtonB	1

What you can do

Function

AI assistant

Written by a model from the evidence it cites · not reviewed

Answers use only what was read of this design: its BOM lines, the function hits, the parsed nets around your selection and the part's catalogue record. Every statement links to its evidence.

The AI assistant is not available here: no model is set up for it. The design, its BOM and the viewer work as usual.

Context: the whole design

PartSign in to ask the assistant

Source

Project: FujiNet for Coleco ADAM
Project category: 接口转换及调试器
BOM number: BOM001219
Version: v1.0
EDA tool: kicad
Parse status: succeeded
Licence: Not identified: the catalogue states no licence and this project's files have not been checked for one yet. Do not assume any right to reuse it.