Manufacturer reference design

ATREB215-XPRO

BOM000858 · V1.0

What the project is · as the catalogue files it; the circuit functions below are BOM rule hits

Filed under “Microchip” in the ezPLM catalogue.

Circuit functions included · BOM rule hits · not reviewed

EEPROM
- U2 AT24MAC602 · by part number
OLED display
- TP8, TP9 Mounting hole dia should be 1.6mm. Refer A08-2059 · by footprint
Secure element / crypto chip / TPM
- U100 ATSHA204A-MAHCZ-T · by part number

PCB · seen from the top

Full size

Schematic

Full size

Online view

Loading the project view…

35 rows · 79 parts0 of 35 rows placedHover or click a row to mark its parts in the view; click a part in the view to find its row.

Looks up part numbers and makers at ezPLM, DigiKey and Mouser. What it finds are suggestions: check one before you use it.

Designators	Value	Part	Qty
J1, J104, J105	HEADER 1x2AP8-00733	HEADER 1x2	3
L3	ceramic chip inductor, 5.6nH, 0201AP3-00041	ceramic chip inductor, 5.6nH, 0201	1
E1, E2, E3	RUBBER FEETAP8-00192	RUBBER FEET	3
R10, R11, R13	Copy of A02-0535AP2-00028	Copy of A02-0535	3
C4, C21	This 1.2pF capacitor is used for RF antennae tuning and can not be replaced by alternatives.AP1-00035	This 1.2pF capacitor is used for RF antennae tuning and can not be replaced by alternatives.	2
TP8, TP9	Mounting hole dia should be 1.6mm. Refer A08-2059AP8-00710	Mounting hole dia should be 1.6mm. Refer A08-2059	2
JS1	To be used by request from ESCATECAP8-00525	To be used by request from ESCATEC	1
U100	ATSHA204A-MAHCZ-TAP6-00409	ATSHA204A-MAHCZ-T	1
C25	Alternate PN GRM033R71C102KA01D is good, but for Rated VoltageAP1-00035	Alternate PN GRM033R71C102KA01D is good, but for Rated Voltage	1
C1, C6, C9, C11, C13, C14, C15, C16, C17, C18, C19, C20	CAP-NONPOLAP1-00001	CAP-NONPOL	12
J100	HEADER-2X10AP8-00621	HEADER-2X10	1
C23	CAP-NONPOLAP1-00026	CAP-NONPOL	1
D1, D2	LED_12AP4-00013	LED_12	2
Q1	Same as 2N7002 but with two MOSFETs in one packageAP5-00001	Same as 2N7002 but with two MOSFETs in one package	1
R7	R2AP2-00028	R2	1
L2	Inductor_IronAP3-00049	Inductor_Iron	1
TP1, TP2, TP4, TP10, TP11, TP12, TP13	TESTPOINTAP8-00399	TESTPOINT	7
SW1	same as A08-0091 but less force is needed; Can be ordered in low volumes from MouserAP8-00137	same as A08-0091 but less force is needed; Can be ordered in low volumes from Mouser	1
P1	Copy of A08-0629AP8-00380	Copy of A08-0629	1
U2	AT24MAC602AP6-00014	AT24MAC602	1
B1, B2	Balun_2.4GHzAP3-00060	Balun_2.4GHz	2
XC1	TXETCCSANF-26.0000AP7-00060	TXETCCSANF-26.0000	1
R1, R2, R3, R5, R6, R8, R12, R100, R101, R102	R2AP2-00000	R2	10
C2, C3, C12	CAP-NONPOLAP1-00035	CAP-NONPOL	3
C10	High Temp versionAP1-00032	High Temp version	1
SMA1, SMA2	Board Edge MountingAP8-00443	Board Edge Mounting	2
R4, R9	Copy of A02-0534AP2-00028	Copy of A02-0534	2
FR1	Shield 20mm x 20mm FrameAP8-00753	Shield 20mm x 20mm Frame	1
U1	48 lead QFN packageAP6-00345	48 lead QFN package	1
C24	CAP-NONPOLAP1-00038	CAP-NONPOL	1
C8	CAP-NONPOLAP1-00032	CAP-NONPOL	1
LABEL1	CommentAP8-00317	Comment	1
C7, C22	C0G, NP0AP1-00032	C0G, NP0	2
J101, J102, J103	SATA_7PIN_HEADERAP8-00746	SATA_7PIN_HEADER	3
C100, C101	Recommended by Escatec. No datasheet available yet.AP1-00001	Recommended by Escatec. No datasheet available yet.	2

What you can do

Function

AI assistant

Written by a model from the evidence it cites · not reviewed

Answers use only what was read of this design: its BOM lines, the function hits, the parsed nets around your selection and the part's catalogue record. Every statement links to its evidence.

The AI assistant is not available here: no model is set up for it. The design, its BOM and the viewer work as usual.

Context: the whole design

PartSign in to ask the assistant

Source

Project: ATREB215-XPRO
Project category: Microchip
BOM number: BOM000858
Version: V1.0
EDA tool: kicad
Parse status: succeeded
Licence: Not identified: the catalogue states no licence and this project's files have not been checked for one yet. Do not assume any right to reuse it.